|
Post by mark on May 2, 2014 22:21:18 GMT -5
Kev or Indy or anyone else who may know, what do I need to do to run 2 divers on my gast pca10. It came from Smokefoot with a low pressure setup on the right side and a pop off valve on the left.
|
|
|
Post by cabarrusgold on May 3, 2014 6:56:21 GMT -5
|
|
|
Post by mark on May 3, 2014 12:06:16 GMT -5
Mark, The best setup is to put a T on the compressor with quick connects where your whip hose to your reserve tank is now. You will need an extra reserve tank, whip hose and air line, regulator. To save a little $ you could put a T on the output of your reserve tank with quick connects. With either setup you just connect the amount of air lines you need at that time. You are much better off with the first setup having 2 reserve tanks in my opinion. We used that setup in CA on a Gast and it worked great for 2 divers down about 18ft. I thought that was how it should work, but it just seemed too simple LOL. I already run a T with a hose dropped in the water to bleed off extra pressure and keep the pop off valve from releasing constantly.
|
|